TeeJet 854 Operating Manual_98-05051 R1

854 Sprayer Control# OF TIPS PER BOOM SECTIONEnter the number of tips on the boomsection corresponding to boom switch#1." Use the + or keys to adjust value." Press thePRO key to advance to thenext stepThe number of tips programmed here arespecific to the preset being used. (I.e.preset – 2 – in this example)S e c61 - 2 -PTeeJet VisiFlo color coding only: For other tips see manual! After programming the number of tips on boom section 1, pressingPROadvances to section 2.! Continue programming the number of tips for each boom section until all 5possible boom sections are programmed.! If a particular boom section switch is not used, set the value to 0.DENSITYAlternate Density UsedWill a product carrier other than water beused?" Use the + or keys to select YES orNO" Press thePRO key to advance to thenext stepDensity ValueIf this carrier has a density other thanwater (i.e. liquid fertilizers) enter theDensity value here" Use the + or keys to change thevalue." Press thePRO key to advance to thenext stepDD e n sPTeeJet VisiFlo color coding only: For other tips see manualDN o1.2 8D e n sPTeeJet VisiFlo color coding only: For other tips see manual51 98-05051R1