TeeJet 854 Operating Manual_98-05051 R1

854 Sprayer ControlFeaturesAREA/VOLUME DISPLAYThe 854 Sprayer Control counts application area and measures the total volumeapplied, while the master boom switch is in the “ON” position.! The area counter measures treatedacres and is dependent on the valuesprogrammed for the # of tips perboom section and the tip spacing.! The volume measure is dependent onflow meter pulses, if a flow meter ispresent, or is calculated based onpressure signals from the PressureTransducer.Depending on how the console wasprogrammed in the OEM setup mode, thelower right of the display window shows:! Volume Sprayed! Area Covered! Both (alternating every 3 seconds).To clear the area counter/volumemeasure:3 3PSI2 0.0GPAMPH0.0 5 6.2 5 AcTeeJet VisiFlo color coding only: For other tips see manualC l rF l dY e sC n t rP" Press and hold the Auto/Man key forthree seconds (Master Boom Switchmust be off)." The controller asks if the field counter should be cleared." Use the + or keys to select either YES or NO." Push thePRO key to accept and return to the normal operating mode.PTeeJet VisiFlo color coding only: For other tips see manualNote: The area/volume measure can only be cleared from the normaloperating mode with the Master Boom Switch turned OFF.*****WARNING***********WARNING***********WARNING*****Clearing the area/volume counter in this manner does NOT save this information.If you wish to save this information refer to the Memory Feature in this manual.57 98-05051R1