Tutorial for the Semi Custom Part of the Image Processing System

86 # if 1, create a clock tree specification file with default values87 # ROUTE_TIMING (0 | 1)88 # if 1, do a timing driven routing89 # OPT ( string )90 # can be used to have different generated file names91 # -----------------------------------------------------------------------------92 set ADD_STRIPES 193 set PLACE_TIMING 194 set CLOCK_TREE 195 set CTS_CREATE_SPEC 096 set ROUTE_TIMING 197 set OPT " _clock10ns_cts "9899 # -----------------------------------------------------------------------------100 # File names101 # -----------------------------------------------------------------------------102 set CONF_FILE_NAME ${ DESIGN } .conf103 set IO_FILE_NAME ${ DESIGN } .io104 set DESIGN_NAME ${ DESIGN }${ OPT }105 set SAVE_DESIGN_FP_NAME ${ DESIGN_NAME } -fplan.enc106 set SAVE_DESIGN_PR_NAME ${ DESIGN_NAME } -pring.enc107 set SAVE_DESIGN_PL_NAME ${ DESIGN_NAME } -placed.enc108 set SAVE_DESIGN_PF_NAME ${ DESIGN_NAME } -placed_filled.enc109 set SAVE_DESIGN_CT_NAME ${ DESIGN_NAME } -cts.enc110 set SAVE_DESIGN_RO_NAME ${ DESIGN_NAME } -routed.enc111 set TIM_RCDB_NAME ${ DESIGN_NAME } .rcdb112 set SDF_FILE_NAME ${ DESIGN_NAME } -routed.sdf113 set SPEF_FILE_NAME ${ DESIGN_NAME } -routed.spef114 set RPT_CHECK_TA_NAME ${ DESIGN_NAME } -checkta.rpt115 set RPT_REPORT_TA_NAME ${ DESIGN_NAME } -ta.rpt116 set RPT_SLACK_NAME ${ DESIGN_NAME } -slack.rpt117 set RPT_GATE_COUNT_NAME ${ DESIGN_NAME } -gate_count.rpt118 set RPT_NOTCH_NAME ${ DESIGN_NAME } -notch.rpt119 set RPT_CONN_NAME ${ DESIGN_NAME } -conn.rpt120 set RPT_GEOM_NAME ${ DESIGN_NAME } -geom.rpt121 set RPT_DENSITY_NAME ${ DESIGN_NAME } -density.rpt122 set VLOG_NETLIST_SIM_NAME ${ DESIGN_NAME } -routed.v123 set VLOG_NETLIST_LVS_NAME ${ DESIGN_NAME } -routed_lvs.v124 set CTS_SPEC_NAME ${ DESIGN_NAME } -spec.cts125 set CTS_RGUIDE_NAME ${ DESIGN_NAME } -guide.cts126 set CTS_RPT_NAME ${ DESIGN_NAME } -cts.rpt127 set GDS_FILE_NAME ${ DESIGN_NAME } .gds128129 # -----------------------------------------------------------------------------130 # Absolute paths131 # -----------------------------------------------------------------------------132 set CONF_FILE ${ PROJECT_DIR }/ PAR / CONF /${ CONF_FILE_NAME }133 set IO_FILE ${ PROJECT_DIR }/ PAR / CONF /${ IO_FILE_NAME }134 set SAVE_DESIGN_FP_FILE ${ PROJECT_DIR }/ PAR /DB/${ SAVE_DESIGN_FP_NAME }135 set SAVE_DESIGN_PR_FILE ${ PROJECT_DIR }/ PAR /DB/${ SAVE_DESIGN_PR_NAME }136 set SAVE_DESIGN_PL_FILE ${ PROJECT_DIR }/ PAR /DB/${ SAVE_DESIGN_PL_NAME }137 set SAVE_DESIGN_PF_FILE ${ PROJECT_DIR }/ PAR /DB/${ SAVE_DESIGN_PF_NAME }138 set SAVE_DESIGN_CT_FILE ${ PROJECT_DIR }/ PAR /DB/${ SAVE_DESIGN_CT_NAME }139 set SAVE_DESIGN_RO_FILE ${ PROJECT_DIR }/ PAR /DB/${ SAVE_DESIGN_RO_NAME }140 set SDF_FILE ${ PROJECT_DIR }/ PAR / TIM /${ SDF_FILE_NAME }141 set SPEF_FILE ${ PROJECT_DIR }/ PAR / TIM /${ SPEF_FILE_NAME }142 set TIM_RCDB_FILE ${ PROJECT_DIR }/ PAR / TIM /${ TIM_RCDB_NAME }143 set RPT_CHECK_TA_FILE ${ PROJECT_DIR }/ PAR / RPT /${ RPT_CHECK_TA_NAME }144 set RPT_REPORT_TA_FILE ${ PROJECT_DIR }/ PAR / RPT /${ RPT_REPORT_TA_NAME }145 set RPT_SLACK_FILE ${ PROJECT_DIR }/ PAR / RPT /${ RPT_SLACK_NAME }146 set RPT_GATE_COUNT_FILE ${ PROJECT_DIR }/ PAR / RPT /${ RPT_GATE_COUNT_NAME }147 set RPT_NOTCH_FILE ${ PROJECT_DIR }/ PAR / RPT /${ RPT_NOTCH_NAME }vlsi2semicustomtutorial.tex Rev: 3, March 27, 2007 19