Made-to-Order Sprockets - Tsubaki

“Taper-Lock” Style Bushings1008-3030TAPER-LOCK BUSHINGS 1008 THROUGH 3030Section A-ABPOSITION OF SCREWTO TIGHTEN BUSHING55˚FOR REMOVING FROM SHAFT:BUSHING HALF OF HOLE THREADED.HUB HALF OF HOLE NOT THREADED.DAAFFOR TIGHTENING ON SHAFT:HUB HALF OF HOLE THREADED.BUSHING HALF OF HOLE NOT THREADED. ANSI “Taper-Lock” Style BushingsAll dimensions in inches unless otherwise stated.LM85˚Std.Std.Bushing F Hex Short Hex Short WeightNumber ❉ Bore Range A B D (2 Required) Key ◆ Key Key ◆Key (lbs.)1008¹⁄₂-11.386 ⁷⁄₈ 1²¹⁄₆₄¹⁄₄ x ¹⁄₂1¹⁄₈ ⁵⁄₈ 1¹⁄₄ ³⁄₄ .201108¹⁄₂-1¹⁄₈1.511 ⁷⁄₈ 1²⁹⁄₆₄¹⁄₄ x ¹⁄₂1¹⁄₈ ⁵⁄₈ 1¹⁄₄ ³⁄₄ .251210¹⁄₂-1¹⁄₄1⁷⁄₈ 1 1³⁄₄³⁄₈ x ⁵⁄₈1³⁄₈ ¹³⁄₁₆ 1⁵⁄₈ 1¹⁄₁₆ .551215¹⁄₂-1¹⁄₄1⁷⁄₈ 1¹⁄₂ 1³⁄₄³⁄₈ x ⁵⁄₈1³⁄₈ ¹³⁄₁₆ 1⁵⁄₈ 1¹⁄₁₆ .701310¹⁄₂-1³⁄₈2 1 1⁷⁄₈³⁄₈ x ⁵⁄₈1³⁄₈ ¹³⁄₁₆ 1⁵⁄₈ 1¹⁄₁₆ .651610¹⁄₂-1⁵⁄₈2¹⁄₄ 1 2¹⁄₈³⁄₈ x ⁵⁄₈1³⁄₈ ¹³⁄₁₆ 1⁵⁄₈ 1¹⁄₁₆ .701615¹⁄₂-1⁵⁄₈2¹⁄₄ 1¹⁄₂ 2¹⁄₈³⁄₈ x ⁵⁄₈1³⁄₈ ¹³⁄₁₆ 1⁵⁄₈ 1¹⁄₁₆ 1.002012¹⁄₂-22³⁄₄ 1¹⁄₄ 2⁵⁄₈⁷⁄₁₆ x ⁷⁄₈1⁹⁄₁₆ ¹⁵⁄₁₆ 2 1³⁄₈ 1.402517¹⁄₂-2¹⁄₂3³⁄₈ 1³⁄₄ 3¹⁄₄¹⁄₂ x 11⁵⁄₈ 1 2¹⁄₄ 1⁵⁄₈ 3.202525³⁄₄-2¹⁄₂3³⁄₈ 2¹⁄₂ 3¹⁄₄¹⁄₂ x 11⁵⁄₈ 1 2¹⁄₄ 1⁵⁄₈ 4.303020¹⁵⁄₁₆-34¹⁄₄ 2 4⁵⁄₈ x 1¹⁄₄1¹³⁄₁₆ 1³⁄₁₆ 2¹¹⁄₁₆ 2¹⁄₁₆ 5.803030¹⁵⁄₁₆-34¹⁄₄ 3 4⁵⁄₈ x 1¹⁄₄1¹³⁄₁₆ 1³⁄₁₆ 2¹¹⁄₁₆ 2¹⁄₁₆ 8.00All bushings can be supplied in steel, stainless steel and other materials. Consult Tsubaki for more details.˚A85 ˚❖ L✛ MSprocketsNOTES:❉ All bore ranges available in 1/16th inch increments.❖ Space required to tighten bushing. Also space required to loosen screws to permit removal of hub by puller.✛ Space required to remove bushing using jackscrews - no puller required.◆ Standard hex key cut to minimum usable length. Metric “Taper-Lock” Style BushingsAll dimensions in millimeters unless otherwise stated.Bore Range14 16 18 19 20 22 24 25 28 30 32 35 38 40 42 45 48 50Keyway(mm)5 x 2.3 5 x 2.3 6 x 2.8 6 x 2.8 6 x 2.8 6 x 2.8 8 x 3.3 8 x 3.3 8 x 3.3 8 x 3.3 10 x 3.3 10 x 3.3 10 x 3.3 12 x 3.3 12 x 3.3 14 x 3.8 14 x 3.8 14 x 3.8Bushing1008 X X X X X X1108 X X X X X X X1210 X X X X X X X X X X1215 X X X X X X X X X X1610 X X X X X X X X X X X X X1615 X X X X X X X X X X X X X2012 X X X X X X X X X X X X X X X2517 X X X X X X X X X X X X X X X X3020 X X X X X X X X X XNote - X denotes that the Taper Lock Bushing is also available with metric bore size key way.All metric bores are supplied with imperial threads.All bushings can be supplied in steel, stainless steel and other materials. Consult Tsubaki for more details.E-136