Made-to-Order Sprockets - Tsubaki

Double Single1/2” PitchNo.40STOCK BOREAll dimensions in inches unless otherwise stated.No. of Catalogue Outside Stock Maximum WeightTeeth Number Diameter Bore Bore LTB C D (lbs.)15161718192021222324HDS40A15HDS40A16HDS40A17HDS40A18HDS40A19HDS40A20HDS40A21HDS40A22HDS40A23HDS40A242.652.812.983.143.303.463.623.783.944.10“TAPER-LOCK” STYLE¹⁄₂¹⁄₂¹⁄₂¹⁄₂⁵⁄₈⁵⁄₈⁵⁄₈⁵⁄₈⁵⁄₈⁵⁄₈All dimensions in inches unless otherwise stated.No. of Catalogue Outside Stock Maximum WeightTeeth Number Diameter Bushing Bore Bore LTB C D (lbs.)1920212324HDS40ATL19HDS40ATL20HDS40ATL21HDS40ATL23HDS40ATL243.303.463.623.944.1012151215161516151615¹⁄₂¹⁄₂¹⁄₂¹⁄₂¹⁄₂Other bushing sizes available. Please specify bushing size when ordering.1¹⁄₄1¹⁄₄1⁵⁄₈1⁵⁄₈1⁵⁄₈1¹⁄₄1¹⁄₄1¹⁵⁄₁₆1¹⁄₂1¹¹⁄₁₆1³⁄₄1³⁄₄1¹⁵⁄₁₆2¹⁄₁₆2¹⁄₄1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹³⁄₃₂1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈1¹⁄₈2¹⁄₂2⁵⁄₈2²⁵⁄₃₂3³⁄₃₂3¹⁷⁄₆₄1.11.31.31.51.71¹³⁄₁₆22¹⁄₈2⁵⁄₁₆2¹⁄₂2⁵⁄₈2²⁵⁄₃₂2¹⁵⁄₁₆3³⁄₃₂3¹⁷⁄₆₄1.21.41.61.82.22.62.93.03.54.0“Taper-Lock” Style BushingsBoreRange WeightBushing (inches) (lbs.)TOOTH (NOMINAL)1215 ¹⁄₂ - 1¹⁄₄ 0.701615 ¹⁄₂ - 1⁵⁄₈ 1.00Refer to pages E-136 and E-137 for bushing specifications.CTOOTH (NOMINAL)CDimensional DataSingle Strand Chain 40Size 40Pitch 0.500"Chain Inside Width 0.313"Roller Diameter 0.313"Nominal Tooth Width 0.284"If the sprocket needed isnot listed above, pleasecontact Tsubaki for madeto-ordercustom sprockets.OUTSIDE DIAMETERBOREDDOUTSIDE DIAMETERSprocketsSprockets with cataloguenumbers that begin with “H”have hardened teeth(Rockwell C35 minimum).LTBSTOCK BOREDOUBLE SINGLELTBTAPER-LOCKDOUBLE SINGLEE-33