Made-to-Order Sprockets - Tsubaki

Universal ProductCross-ReferenceThis chart is a quick, easy way to replace your current chainsand sprockets with high-quality, reliable products from TsubakiThe list is sorted by chain number, and you’ll find thecorresponding Tsubaki number listed for each.The chart was compiled with great care and with the latestinformation available at the time of printing. Because of thepossibility of errors in competitors’ publications or changes inproduct specifications, Tsubaki does not assume responsibilityfor the accuracy of competitors’ information. Please check thechain or sprocket specifications on the corresponding pagenumbers carefully before ordering.Chain Interchangeability GuidelinesThere are several degrees of interchangeability for chainreplacement between manufacturers’ chains.1. Intercoupling of ChainsThe pin of one chain can be put through the bushing ofanother. However, the pin and outside sidebars must beproduced by the same manufacturer. When connected,the two chains form one strand.2. Interchanging of PartsBecause each manufacturer has different part designs andtolerances, interchanging parts is not suggested. Due tothe differences in tolerances, we suggest you use Tsubakireplacement parts for Tsubaki chains.3. Running on the Same SprocketMany replacement chains will run on the same sprocketseven though they are not the same chains. The followingdimensions must be equivalent in the original andreplacement chains to run on the same sprocket.• PitchSprockets• Roller, barrel, or bushing diameter(depending on chain type)• Inside widthIf you have any questions about using the Universal ProductCross-Reference or interchangeability in general, contactTsubaki Technical Support. We can help you select the rightreplacement chain or sprocket for your application.E-221