Made-to-Order Sprockets - Tsubaki

No.35Single/Double“Taper-Lock” Style3/8” PitchAll dimensions in inches unless otherwise stated.Sprocket Diameters³⁄₈” PitchNo. Outside Pitch CaliperTeeth Diameter Diameter DiameterSingle (Type B) Double (Type B)Catalogue Max. Hub WeightNumber Style Bushing Bore Diameter LTB (lbs.)181920212223242526283032353640424548546070728084961122.3522.4722.5932.7132.8832.9543.0743.1943.3143.5533.7934.0324.3924.5114.9905.2295.5885.9466.6637.3808.5758.8149.77010.24711.68013.5902.1602.2792.3972.5162.6352.7542.8732.9923.1113.3493.5883.8264.1844.3034.7805.0185.3765.7346.4497.1658.3588.5979.55210.02911.46113.3711.9602.0712.1972.3092.4352.5482.6732.7862.9113.1493.3883.6263.9794.1034.5804.8185.1735.5346.2496.9658.1588.3979.3529.82911.26113.171H35BTL18H35BTL19H35BTL20H35BTL21H35BTL22H35BTL23H35BTL24H35BTL25H35BTL26H35BTL28H35BTL3035BTL3235BTL3535BTL3635BTL4035BTL4235BTL4535BTL4835BTL5435BTL6035BTL7035BTL7235BTL8035BTL8435BTL9635BTL112SSSSSSSSSSSSEEEEEEEEEEEEEE1008100810081008121012101210121016101610161016101610161016101610161016101610161016101610161016101610161011111¹⁄₄1¹⁄₄1¹⁄₄1¹⁄₄1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁵⁄₈1⁷⁄₈ 1¹³⁄₁₆1¹⁵⁄₁₆2¹⁄₁₆2³⁄₈2⁷⁄₁₆2⁷⁄₁₆2⁷⁄₁₆2⁷⁄₈ 2⁷⁄₈3333333333333333⁷⁄₈⁷⁄₈⁷⁄₈⁷⁄₈11111111111111111111110.40.50.60.70.80.90.91.21.11.21.21.31.41.41.92.02.12.32.63.03.73.94.54.96.07.8HD35BTL19HD35BTL20HD35BTL21HD35BTL22HD35BTL24HD35BTL26HD35BTL30D35BTL32D35BTL35D35BTL40D35BTL45D35BTL48D35BTL54D35BTL60D35BTL70D35BTL80D35BTL96D35BTL112SSSSSSSSSSSSSSSSSSOther bushing sizes and mounting directions available. Specify bushing size and mounting direction (hub or plate side) when ordering. There is a recessed groove in the hub to allow for chain clearance.Catalogue Hub WeightNumber Style Bushing Diameter (lbs.)1008100810081008121012101610161016101610161016101610161016101610161016101⁵³⁄₆₄1¹⁵⁄₁₆2¹⁄₁₆2³⁄₁₆2⁷⁄₁₆2⁵⁄₈3¹⁄₈3¹⁄₄3¹⁄₄3¹⁄₄3¹⁄₄3⁵⁄₈3⁵⁄₈3⁵⁄₈3⁵⁄₈3⁵⁄₈3⁵⁄₈3⁵⁄₈0.60.81.41.71.82.01.82.02.32.53.34.05.06.28.410.915.921.7Sprockets“Taper-Lock” Style BushingsBoreRange WeightBushing (inches) (lbs.)100812101610¹⁄₂ - 1¹⁄₂ - 1¹⁄₄¹⁄₂ - 1⁵⁄₈Dimensional DataSingle Strand Chain 35Size 35Pitch 0.375"Chain Inside Width 0.188"Roller Diameter 0.200"Nominal Tooth Width 0.168"Double Strand Chain 35Size 35-2Pitch 0.375"Chain Inside Width 0.188"Roller Diameter 0.200"Nominal Tooth Width 0.162"Plate Thickness 0.561"0.200.550.70Refer to pages E-136 and E-137 for bushing specifications.OUTSIDE DIAMETERSingle “Taper-Lock” StyleTOOTH (NOMINAL)HUB DIAMETEROUTSIDE DIAMETERTOOTH (NOMINAL)HUB DIAMETERDouble “Taper-Lock” StyleOUTSIDE DIAMETERHUB DIAMETERPLATE THICKNESSTOOTH (NOMINAL)If the sprocket needed is not listedabove, please contact Tsubaki formade-to-order custom sprockets.LTBSTYLE STYPE BLTBSTYLE ETYPE BLTBSTYLE STYPE BSprockets with catalogue numbersthat begin with “H” have hardenedteeth (Rockwell C35 minimum).E-20