Unit III - Sanitary Sewer Design Standards - City of Fort Wayne

More documents

Recommendations

Info

Water Resources Development Criteria/Standards Manual Chapter 2UNIT III - Sanitary Sewer Design StandardsSubmittalsIII-2-5 Sanitary Sewer Facilities Review ChecklistIII-2-6 Minimum Construction Plan Requirements ChecklistIII-2-7 IDEM Local Permitting FormsCreated: January 1, 2002 III - 2 - 2 City of Fort WayneRevised:
Water Resources Development Criteria/Standards Manual Chapter 2UNIT III - Sanitary Sewer Design StandardsSubmittals2.1 PurposeCHAPTER 2 – SUBMITTALSThe purpose of this chapter is to outline the minimum requirements for the submittal of plans forproposed sanitary sewer improvements. The requirements for public sewers, building sewers,and pump stations are all discussed. These submittal requirements are intended to supplement theDesign Manual and Chapter 51 of the Fort Wayne Code of Ordinances and the Fort Wayne WaterPollution Control Utility Rules and Regulations.Submittal requirements shall be discussed with the staff of Water Resources during thepreliminary planning phase for all projects. The size and type of submittal typically varies withthe size and type of the project and details will be developed with the project manager designatedby Water Resources.Preparation of all project submittals shall be the responsibility of the project designer.2.2 Public Sewers2.2.1 Conceptual Approval2.2.1.1 First ChecklistConceptual approval will begin with completion of the First Checklist found inExhibit III-2-1. This checklist addresses planning issues and submittalrequirements. The form shall be completed and submitted to Water Resourceswith an Area Map or Drainage Map, whichever is deemed necessary by the firstChecklist.2.2.1.2 Map SubmittalTwo (2) copies a general Area Map or Sanitary Sewer Service Area Map will berequired. A general Area Map shall generally include the following:a. Boundaries of the proposed developmentb. Point of connection to existing sewer facilitiesc. Intended land used. Estimate flow to be generated by the developmentAn example Area Map is included as Exhibit III-2-2. Sanitary Sewer ServiceArea Maps, an example of which is found in Exhibit III-2-3, shall be prepared inaccordance with Section 3.6. It should be noted that although an Area Map maybe acceptable for conceptual approval, a more comprehensive Sanitary SewerService Area Map will be required for the actual project design. Accompanyingthe request for Conceptual Approval and map submittal, shall be a statement ofanticipated project start and completion dates.Created: January 1, 2002 III - 2 - 3 City of Fort WayneRevised:
Page 1 and 2: Water Resources Development Criteri
Page 13: Water Resources Development Criteri
Page 63: Exhibit III-2-1City Utilities First
Page 67 and 68:
Exhibit III-2-5City Utilities Sanit
Page 69 and 70:
Exhibit III-2-7City Utilities IDEM
Page 71 and 72:
Exhibit III-3-1City Utilities Waste
Page 73:
Exhibit III-3-3City Utilities Minim
show all

Unit III - Sanitary Sewer Design Standards - City of Fort Wayne

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?