Unit III - Sanitary Sewer Design Standards - City of Fort Wayne

Water Resources Development Criteria/Standards Manual Chapter 5UNIT III - Sanitary Sewer Design StandardsPump Stations5.3 Design Approach• Complete materials and product selections in accordance with City designstandards.• Determine the location of the proposed improvements and temporary orpermanent right-of-way needs.C. Prepare Preliminary Construction Documents• Develop plan and profile drawings for the project. The drawings should bedeveloped in accordance with all provisions of Unit I – GeneralRequirements.• Conduct a field review of the proposed layout to identify any constraintsnot readily identified during surveying.• Meet with City staff to discuss and review comments.Three (3) copies of the Final Design Plans and Documentation shall be submitted toWater Resources.5.3.1 ApprovalsPrior to construction or expansion of any sanitary pump stations, the design documentsmust be approved by both Water Resources and IDEM or the local IDEM review entities.IDEM may be contacted directly at the following address to determine requiredsubmittals and associated fees:Facility Construction SectionIndiana Department of Environmental Management100 North Senate AvenueP.O. Box 6015Indianapolis, IN 46206-6015website: www.in.gov/idem/water/permitsAll submittals must be signed and sealed by a Professional Engineer registered in theState of Indiana.5.3.2 Service LevelGuidelines presented in this Manual shall govern the planning and design of small pumpstations with maximum peak flow not exceeding 700 gallons per minute and/or totaldynamic head not exceeding 80 feet (80’).For proposed construction or expansion of pump stations exceeding the above-mentionedranges, Water Resources shall be consulted for additional design requirements.Created: January 1, 2002 III - 5 - 7 City of Fort WayneRevised: