contents - Utax

MaintenanceMISCELLANEOUS INCIDENTSAt switch-on nothing appears on screenCheck that the mains cable is plugged in, and check the mains plug if necessary.The fax does not detect the presence of your inserted document. The message READY does notappear on the screen.At the start and during scanning, REMOVE DOCUMENT appears on the screen.Remove the document or press key .Check the thickness of the document (50 sheets of paper of 80 g/m 2 ).Iron out the sheets if needed.Help the sheets along.The fax machine does not receive any faxesCheck that the telephone line cable is correctly plugged in and that there is a tone signal on thetelephone line by means of the key.You receive a blank pageMake a photocopy of a document ; if it is correct then your fax is functioning normally. Call back thesubscriber and have him resend the document. It was probably sent with the sheet inserted backwards.You cannot send a faxCheck that the telephone line cable is correctly plugged in.Check the tone by pressing the key.Check the prefix is correctly programmed and used.6-26