User's Manual SiteView – Data Logger Software

Memory Usage:Specify the memory usage for the new setting.If you change Time to Start and Time to End, Total Time Span will change accordingly.Channel SettingsEnabledCheck this field to enable this channel for logging.Channel RangeThis field specifies the channel type and range the channel will use. The available settings foreach channel depend on the logger type.DescriptionThis field specifies the information for the channel using a maximum of 30 characters.EquationThis field specifies the equation used for the channel.For the detailed instructions on how to create a custom equation please refer to the Work withEquation and Equation References chapters.Cali. Low & Cali. HighThese two fields specify the custom calibration values that are used for measurementadjustment.Custom Channels:A custom channel is a virtual channel that SiteView can add to a data logger. Because there isno physical measurement source for this kind of channel, the logger can not save the channel’sdata in the logger’s memory. Instead, the channel’s data is parsed in SiteView after the data isdownloaded to the computer.You can add maximum of eight custom channels to a logger.The following tool bar buttons are used to manage the custom channels of the logger.Click to add a custom channel.Click to remove a selected custom channel.Click to move up a selected custom channel.Click to move down a selected custom channel.SiteView User’s Manual – Microedge Instruments Inc. 135/200