User's Manual SiteView – Data Logger Software

CHAPTER 8 - CALIBRATE LOGGERSiteView software provides two-point calibration for most of the loggers. If the source signal likevoltage or current can be connected to the logger while the logger is connecting to the computer, youcan calibrate the logger on-line. If the source signal like a temperature or relative humidity is notavailable for on-line calibration, you can calibrate the logger off-line after the logger has recordedthe low and high point data.On-Line CalibrateClick Calibrate button on the top of the logger status page in SiteView and choose On-LineCalibrate menu.The following dialog appears:SiteView User’s Manual – Microedge Instruments Inc. 55/200