Read all instructions in this manual and component part - Jayco

Setting Up Camp...Additional Set UpSTABILIZER JACKS1. Insert the crank onto the stabilizer jack shaft.2. Turn it clockwise to lower the jack. Continue lowering the jack until the frame of thetrailer begins to rise slightly.3. Equalize the jacks for best support. This may require that you adjust each jack severaltimes. When not parked on cement, you may wish to place a wood or hard plasticblock under the jack for convenience.WARNING: DO NOT USE THE STABILIZER JACKS TO LEVELTHE UNIT. It is important to remember that the stabilizer jacks are tobe used only for support while occupying and moving around thetrailer. They are not designed to bear the weight of the trailer.MAIN ROOM SLIDEOUT (CERTAIN MODELS)The slideout room is designed for additional floor space and comfort. Mechanicalcomponents are gear driven. Read ALL slideout instructions before operation.CAUTION: Do not place excessive weight in the slideout room. It cancause the slideout room to malfunction and cause damage to theslideout. WARNING: Ensure that the trailer is level before operating the slideout room.Water leaks and other problems could result if the slideout is operatedwithout leveling the trailer. Ensure there are no people or obstructions blocking the path of theroom when it is moving. Keep away from the slide rails when the room is in motion. The gear assembly may pinch or catch on loose clothing causingpersonal injury. Ensure the slideout is in the closed position prior to hooking the unit tothe tow vehicle.FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT INSERIOUS INJURY OR DEATH.Jay Flight Conventional Travel Trailer and Fifth-Wheel Travel Trailer 41