12.07.2015 Views

Read all instructions in this manual and component part - Jayco

Read all instructions in this manual and component part - Jayco

Read all instructions in this manual and component part - Jayco

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Sett<strong>in</strong>g Up Camp...Waste DisposalProper care of the sanitation system is critical to efficient operation. Make sure that youhave reviewed <strong>and</strong> underst<strong>and</strong> the operation of your system.Some campgrounds provide sewer hook up right at the <strong>in</strong>dividual campsite. Thisconvenience can save a great deal of energy if utilized properly. If hook up is not providedat your site, the trailer will need to be moved to an approved dump station.The term<strong>in</strong>ation valves for your hold<strong>in</strong>g tanks are located on the exterior of the trailer closeto the dra<strong>in</strong> pipe.When hooked up to the sewer dra<strong>in</strong> l<strong>in</strong>e at a campsite, keep the term<strong>in</strong>ation valve on thewaste tank CLOSED until the tank is at least 3/4 full. This will provide sufficient water toassist <strong>in</strong> complete dra<strong>in</strong><strong>in</strong>g of the tank. At <strong>this</strong> time, open the term<strong>in</strong>ation valve to emptythe tank (see directions for dra<strong>in</strong><strong>in</strong>g below) <strong>and</strong> close the valve when the tank is empty.Repeat <strong>this</strong> process as needed, but NEVER leave the term<strong>in</strong>ation valve open when hookedup to the park’s sewer system.To connect the trailer for waste disposal1. Make sure the unit is as level as possible to aid with dra<strong>in</strong>age.2. Attach the adapter to the flexible sewer hose <strong>and</strong> secure it with a clamp.3. Remove the dust cap <strong>and</strong> attach the adapter onto the dra<strong>in</strong> pipe.4. Turn the adapter 10° to lock it onto the pegs on the dra<strong>in</strong> pipe.5. Place the other end of the hose <strong>in</strong>to an approved sewer system.6. Open the black tank term<strong>in</strong>ation valve to empty the black tank.7. Open the gray tank term<strong>in</strong>ation valve to empty the gray tank, utiliz<strong>in</strong>g the water tor<strong>in</strong>se the flexible hose.Jay Flight Conventional Travel Trailer <strong>and</strong> Fifth-Wheel Travel Trailer 47

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!