Assembly Instructions - Swing-N-Slide

Assembly InstructionsFig. 19(6)2-1/2'' screwsper board(1) 1'' x 4'' x 24''(2)2-1/2'' screwsper joint(7) 1'' x 4'' x 27''NOTE: There must be a 1/4''Nominal Gap between alldeck boards.Access Deck Surface1. Install deck boards on Access Deck as shown in (Fig. 19).Note: Hardware installed down the center of the deck will secureinto the Cross Deck Support underneath.2-1/2'' Wood Screw27