Assembly Instructions - Swing-N-Slide

Fig. 21Assembly Instructions1'' x 4'' x 21''8''2'' x 4'' x 30''(2)2-1/2'' screwsper joint1'' x 4'' x 21''NOTE: There must be a 1/4''Nominal Gap between alldeck boards.Fig. 21aFig. 21b(2)2-1/2'' screwsper joint(6) 1'' x 4'' x 27''(6)2-1/2'' screwsper board5-1/2''(1) 1'' x 4'' x 27''Lower Deck Support, Surface and Spacer Board1. Assemble Lower Deck Support as shown in (Fig. 21).2. Install Lower Deck Boards as shown in (Fig. 21a).Note: Hardware installed down the center of the deck will secureinto the Cross Deck Support underneath.3. Install Lower Deck Spacer Board as shown in (Fig. 21b).2-1/2'' Wood Screw29