Assembly Instructions - Swing-N-Slide

More documents

Recommendations

Info

Assembly InstructionsSlide Installation.1. Install Slide centered in the providedopening as shown in (Fig. 37).2. Attach Stake to end of slide as shown in(Fig. 37a).Fig. 37(4)1'' Truss screwsFig. 37a(2)1-1/4'' screwsper joint2'' x 4'' x 17-1/4''2'' Above Ground1'' Truss ScrewUse truss head screws toto secure slide to deck.Anchor-ItFig. 37bAnchor-It Installation.Instructions for Anchoring Swing•N•Slide Activity CentersmetalstrapFlat Washer1-1/2"lag bolt1. Determine the final location of your activity center.2. Place the Anchor-It stakes adjacent to the base and near the corners ofyour activity center (at the bottom of the legs on swing sets) and twistthe auger-style stakes into the ground until only the loop is exposed.3. Place the metal strap through the loop of the Anchor-It stake and secureit to the unit with a lag screw and washer as illustrated to the right.Note: Attach the strap to the unit with as little play as possible usingwhatever holes in the strap that work best.Anchor-It46
RSwing SeatsAssembly InstructionsFig. 38Swing Seats1. Attach Chain to Swing Hanger as shown in (Fig. 38).2. Tighten Quick Link to secure chains to Swing Hangers as shown in (Fig. 38).Note: When attaching Quick Link, make certain threads are pointing up. This willhelp keep the Quick Link from loosening over time.Name PlateFig. 39INTENDED FOR USE BY CHILDRENFROM AGES 2-10 YEARSFOR HOME / RESIDENTIAL USEONLYDISEÑADO PARA SER USADO PORNIÑOS ENTRE 2 Y 10 AÑOS DEEDAD PARA USO EN ELHOGAR/USO RESIDENCIALÚNICAMENTERÉSERVÉ À L_UTILISATION PARDES ENFANTS DE 2 À 10 ANSUSAGE RÉSIDENTIEL/FAMILIALSEULEMENTName Plate Install1. Secure the Name Plate onto an easy to readlocation of any upright by using (2) 1/2''Pan Head Screws as shown in (Fig. 39).(2)1/2'' Pan Head screws1212 Barberry DriveJanesville, WI 535451-800-888-1232www.swing-n-slide.comName Plate1/2'' Pan HeadScrew47
Page 1 and 2: PB 8201ASSEMBly INSTRUCTIONS29'31'N
Page 3 and 4: This product is intended for single
Page 8 and 9: Assembly InstructionsBoard list Con
Page 10 and 11: Assembly InstructionsTip: Flex brac
Page 12: Assembly Instructions(2)1-1/4'' Lag
Page 17 and 18: Assembly InstructionsFig. 96-1/2''
Page 19 and 20: Assembly InstructionsT-nutFig. 11Wa
Page 21 and 22: Assembly InstructionsFig. 13(2) 2''
Page 23 and 24: Assembly InstructionsFig. 15(3)2-1/
Page 29 and 30: Fig. 21Assembly Instructions1'' x 4
Page 33 and 34: Assembly InstructionsUNIT HAS BEEN
Page 35 and 36: Assembly InstructionsFig. 27(2) 1''
Page 37 and 38: Assembly InstructionsFig. 29Fig. 29
Page 39 and 40: Assembly InstructionsFig. 31Fig. 31
Page 41 and 42: Assembly InstructionsFig. 32bFig. 3
Page 43 and 44: Assembly InstructionsFig. 342'' x 4
Page 45: Assembly InstructionsFig. 36(2)1-1/
Page 49 and 50: Assembly InstructionsSafety HandleF
Page 51 and 52: 51Assembly Instructions

Assembly Instructions - Swing-N-Slide

Create successful ePaper yourself

Delete template?

Save as template?