Star Line Mode Printer Driver

Star Micronics Co., Ltd.Star Line Mode Printer Driver – Windows 2000 and XPCopyright 2004 Version 0.3.1281.10Paper SizesEach of the printer drivers contained within this driver set defines one standard paper size, one receipt papersize, and also supports user defined paper sizes. The following table lists the standard paper sizes supportedby each model’s printer driver.Standard Paper Sizes:Model Paper Size Width LengthTSP212 72mm x 254mm 72mm 254mmTSP242 72mm x Receipt 72mm 3,000mm (3meter)SCP700RTSP412 75mm x 254mm 75mm 254mmTSP442 75mm x Receipt 75mm 3,000mm (3meter)TSP550 72mm x 254mm 72mm 254mmTSP2000 72mm x Receipt 72mm 3,000mm (3meter)TSP613TSP643TSP743 1.2 72mm x 254mm 72mm 254mm72mm x 200mm 72mm 200mm72mm x Receipt 72mm 3,000mm (3meter)80mm x 200mm 80mm 200mm80mm x Receipt 80mm 3,000mm (3meter)52.5mm x 200mm 52.5mm 200mm52.5mm x Receipt 52.5mm 3,000mm (3meter)50.8mm x 200mm 50.8mm 200mm50.8mm x Receipt 50.8mm 3,000mm (3meter)TSP847 104mm x 254mm 104mm 254mmTSP1000 1 80mm x 200mm 80mm 200mm80mm x Receipt 80mm 3,000mm (3meter)72mm x 200mm 72mm 200mm72mm x Receipt 72mm 3,000mm (3meter)TUP452 75mm x 254mm 75mm 254mmTUP482 75mm x Receipt 75mm 3,000mm (3meter)TUP492TUP942 3 104mm x 254mm 104mm 254mmTUP992 104mm x Receipt 104mm 3,000mm (3meter)80mm x 254mm 80mm 254mm80mm x Receipt 80mm 3,000mm (3meter)72mm x 254mm 72mm 254mm72mm x Receipt 72mm 3,000mm (3meter)1 The TSP1000 and TSP743 models support a number of paper widths. The TSP743 model required for F/WVer. 6.0 or later.2 The TSP743 model required memory switch setting before firmware version T7 6.0, when you use otherthan 72mm width paper. For full details on the function, see that printer’s user manual.3The TUP992 and TUP942 model required memory switch setting, when you use other than 104mm widthpaper. For full details on the function, see that printer’s user manual.18 / 29