Star Line Mode Printer Driver

Star Micronics Co., Ltd.Star Line Mode Printer Driver – Windows 2000 and XPCopyright 2004 Version 0.3.1281.10Barcode Font UsageUsage of the supported barcode device fonts must be done as follows:1. Choose the desired barcode device font from your editor’s font menu2. Enter the single letter width code.Each barcode type can be printed at various widths. This table lists the single letter width codes foreach barcode type:Single Letter Width CodeUPC-EUPC-AJAN/EAN-8JAN/EAN-13CODE39NW-7(Codabar)a 2 dot 2 dot (6) 2 dot (5)b 3 dot 3 dot (9) 4 dot (10)c 4 dot 4 dot (12) 6 dot (15)d NOT AVAILABLE 2 dot (5) 2 dot (4)e 3 dot (8) 4 dot (8)f 4 dot (10) 6 dot (12)g 2 dot (4) 2 dot (6)h 3 dot (6) 3 dot (9)i4 dot (8) 4 dot (12)3. Enter the single letter height code.All barcode types use the same single letter height codes, and these are:Single Letter Height Code Heighto32 dot (4mm)p64 dot (8mm)q96 dot (12mm)r128 dot (16mm)s160 dot (20mm)t192 dot (24mm)u224 dot (28mm)v255 dot (31.9mm)4. Enter the barcode data.Each barcode type can accommodate a different character set, and a different number of characters.This information is summarized in the following table:Barcode Type Number of Characters Character SetUPC-E 12 0 ~ 9UPC-A 12 0 ~ 9JAN/EAN-8 8 0 ~ 9JAN/EAN-13 13 0 ~ 9CODE39 1 or more 0 ~ 9-.$/+%A ~ ZStart / Stop: *ITF 1 or more 0 ~ 9NW-7(Codabar) 1 or more 0 ~ 9-$:/.+A ~ D5. Enter the barcode font stop character ‘z’ to terminate the barcode.Example:Using the UPC-E device font: a 2 dot wide, :64 dot tall barcode with the twelve digits: 0123456789012 is:ap012345678901z => a p 012345678901 z| | | || | | ->terminate barcode character| | -------->barcode data| ---------------->single letter height code------------------>single letter width codeITF24 / 29