User's Manual - doc-station.ru
User's Manual - doc-station.ru
User's Manual - doc-station.ru
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SD-TestBus 2 v. 2.16<br />
7.3 Trips<br />
If the alarm condition has reached a timeout (i.e. L timing) the relay sends a trip command to the circuit breaker<br />
and then enters into the “tripped” status. In this page it is possible to catch information about the cause of the<br />
trip and the protection’s name that has timed out.<br />
Depending on the type of relay, it is possible to read information about previous trips (called Trip history).<br />
7.4 Measures History<br />
In this table are shown the measures of current, voltages and power recorded by the relay. It is possible to define<br />
the time interval between two measures (for ex. 5 min).<br />
ABB SACE ABB SD-TestBus2 v. 2.16 1SDH000602R0002 L2937 EN<br />
20 di 28