ARM DS-5 Using the Debug Hardware Configuration Utilities

Creating debug hardware target configurations5.4.2 Device context menu controlsTo display the device context menu, right-click on a device in the scan chain schematic. Thefollowing options are available for all devices:• Select Properties... to change the properties of the device.• Select Configuration... to configure the device.• Select Remove Device to remove the chosen device.For a CoreSight system, the Read CoreSight ROM table option is available for theARMCS-DP device. This enables your debug hardware to read the CoreSight ROM table.5.4.3 Managing a platform fileTo manage a platform file for your development board:If a platform file exists, click Select Platform... to choose a platform that corresponds to yourdevelopment board.When a platform is assigned to your configuration, the Select Platform ... button changes toClear Platform. Click Clear Platform to remove the platform assignment from yourconfiguration.5.4.4 Managing trace associationsIf you are configuring a CoreSight system, click the Trace Associations ... to manage theCoreSight trace associations.5.4.5 See alsoTasks• Connecting to a debug hardware unit on page 2-8• Adding devices to the scan chain on page 5-12• Removing devices from the scan chain on page 5-16• Changing the order of devices on the scan chain on page 5-17• Changing the properties of a device on page 5-23• Setting the clock speed on page 5-24• Setting up a CoreSight trace association file on page 6-11.Concepts• About configuring a device list on page 5-9.Reference• Select Platform dialog box on page 5-18• Device Properties dialog box on page 5-21• Trace Association Editor dialog box on page 6-9• Debug hardware device configuration settings on page 5-26.ARM DUI 0498F Copyright © 2010-2012 ARM. All rights reserved. 5-8ID021112Non-Confidential