Heater Catalog - Watlow

Cartridge/Insertion HeatersMin. No-HeatFIREROD Cartridge HeatersLATermination Options (Continued)1 in.(25 mm)LA Straight Stainless Steel HoseMin. No-HeatMin. No-HeatMin. No-Heat1 in.(25 mm)LA Straight Stainless Steel BraidMin. No-HeatAn LA straight stainless steel hose provides the bestprotection against abrasion from sharp edges. It alsooffers ease of handling and wiring in abrasiveenvironments. Unless specified a 12 in. (305 mm)hose is supplied. Leads are 2 in. (51 mm) longerthan the hose but, longer leads are available.The minimum lead end no-heat required is 3 /4 in.(19 mm). This option adds 1 /2 in. (13 mm) to the overalllength. To order, specify option code H.Min. No-HeatThe LA straight stainless steel braid is designed to protectleads from abrasion against sharp edges. It is the mostMin. No-Heatflexible Watlow protective lead arrangement.Unless specified, a 12 in. (305 mm) braid is supplied.Leads are 2 in. (51 mm) Min. longer No-Heat than the braid, but longerleads are available.The minimum lead end no-heat required is 3 /4 in.(19 mm). This option adds 1 /2 in. (13 mm) to the overalllength. To order, specify option code C.LA Straight Stainless Steel Hose withPTFE Leads and SealLA Straight Stainless Steel Braid withPTFE Leads and SealMin. No-HeatAn LA straight stainless steel hose with PTFE leads andseal is the ultimate combination for providing abrasionprotection and a moisture resistant seal. Unless specified,a standard 12 in. (305 mm) hose is supplied. Leads are2 in. (51 mm) longer than the hose, but longer leads areavailable. This seal is effective up to 392°F (200°C) undercontinuous operation.The minimum lead end no-heat required is 1 in. (25 mm).This option adds 3 /4 in. (19 mm) to the overall length. Toorder, specify option code G.Min. No-HeatThe LA straight stainless steel braid with PTFE leads andseal is Watlow’s most flexible lead protection witha moisture resistant seal. Unless specified, a 12 in.(305 mm) braid is supplied. Leads are 2 in. (51 mm)longer than the braid, but longer leads are available.This seal is effective up to 392°F (200°C) undercontinuous operation.The minimum lead end no-heat required is 1 in. (25 mm).This option adds 3 /4 in. (19 mm) to the overall length. Toorder, specify option code F.WATLOW ®21