Heater Catalog - Watlow

Cartridge/Insertion HeatersFIREROD Cartridge HeatersMade-to-OrderRight Angle OptionsRight Angle LeadsAdder LengthMin. No-HeatRight Angle Stainless Steel BraidAdder LengthMin. No-Heat¼ in. (6 mm)No-Heat¼ in. (6 mm)No-HeatRight angle leads are used in applications with a highdegree of flexing and when space limitations are critical.Standard lead wires are connected internally (swaged-in)and exit at a 90° angle at the end of the heater.Diameter 1 /4 3 /8 1 /2 5 /8 3 /4Adder length in. (mm) 1 /4 (6) 1 /4 (6) 5 /16 (8) 7 /16 (11) 7 /16 (11)Min. no-heat in. (mm) 1 1 /4 (32) 1 1 /4 (32) 1 5 /16 (33) 1 7 /16 (37) 1 7 /16 (37)Note: This option is available with PTFE leads and seal.Minimum no-heats are longer. Contact your Watlowrepresentative for details.Right Angle Stainless Steel HoseA right angle stainless steel braid is provided for wiringconvenience. It protects leads from abrasion againstsharp edges.Unless specified, a 12 in. (305 mm) hose is supplied.Leads are 2 in. (51 mm) longer than the hose.Diameter 1 /4 3 /8 1 /2 5 /8 3 /4Adder length in. (mm) 5 /16 (8) 3 /8 (10) 9 /16 (14) 11 /16 (17) 13 /16 (21)Min. no-heat in. (mm) 1 5 /16 (33) 1 3 /8 (35) 1 9 /16 (40) 1 11 /16 (43) 1 13 /16 (46)Note: This option is available with PTFE leads and seal.Minimum no-heats are longer. Contact your Watlowrepresentative for details.Adder LengthMin. No-Heat¼ in. (6 mm)No-HeatA right angle stainless steel hose is provided for wiringconvenience. It protects leads from abrasion againstsharp edges.Unless specified, a 12 in. (305 mm) hose is supplied.Leads are 2 in. (51 mm) longer than the hose.Diameter 1 /43 /81 /25 /83 /4Adder length in. (mm) 5 /16 (8) 3 /8 (10) 9 /16 (14) 11 /16 (17) 13 /16 (21)Min. no-heat in. (mm) 1 5 /16 (33) 1 3 /8 (35) 1 9 /16 (40) 1 11 /16 (43) 1 13 /16 (46)Note: This option is available with PTFE leads and seal.Minimum no-heats are longer. Contact your Watlowrepresentative for details.WATLOW ®29