Operations manual - FP-IMS

Using the T 1000 TrendYou have now selected the department. Allsubsequent postage printed will be recordedas number of pieces and postage value forthis department.For reading and clearing account informationsee chapter 5.3.3 FrankingCaution! Remove all staples and paper clipsfrom the area around the imprint, otherwisethis may cause damage to the thermal printhead.• Place your envelope on the letter receivingtray with the address facing upward.• The letter must be pushed along the letterguide beneath the thermal printhead until themachine grabs the envelope. Now just runyour envelope through from left to right.When franking larger pieces (B4, C5) be surethat the envelope is located parallel to theletter guide.Use envelopes with a smooth surface toguarantee optimum printing quality.If the envelope is too thick, use a frankinglabel instead.13