Download - VEX Robotics

Create the Bevel GearsIn this section of the exercise, you create two bevelgears.5. Under Gear2, for Number of Teeth, enter 24.1. On the Assembly Panel, click the arrow. ClickDesign Accelerator.6. If the Summary window is not open, click thechevron.2. Click the arrow beside Spur Gears Generator.Click Bevel Gears Generator.7. Click Calculate. The current design fails.8. Click the Calculation tab.9. Under Loads:3. Under Common:■For Facewidth, enter 0.25.■For Power (P), enter 0.01.■For Speed (n), enter 100.■For Diametral Pitch, select 24.000 ul/infrom the list.10. Click Calculate. The current design iscompliant.4. Under Gear1, for Number of Teeth, enter 24.11. Click the Design tab.16■Unit 10: Drivetrain Design 2