Download - VEX Robotics

7. Press E to start the Extrude tool.■Select inside the circle.■For Distance, enter 0.375.■■Click Flip Direction.Click OK.8. Rotate the gear to view the extrudedfeature.Insert an iFeatureIn this section of the exercise, you insert an iFeaturefor the square hole in the gear.An iFeature is one or more features that can be savedand reused in other designs. This iFeature wasextracted from another gear.1. Click Insert iFeature.2. Click Browse. The default location foriFeatures is displayed.3. Click Workspace to navigate to yourworking folder.9. On the ViewCube, click Home.10. In the browser, expand the lastextrusion in the list. Right-click thesketch. Click Share Sketch.11. Press E to start the Extrude tool.■Select inside the circle.■For Distance, enter 0.047.■Click OK.4. Select SquareHole.ide. Click Open.5. Select the front face of the extrusion. Inthe dialog box, a check mark is added toProfile Plane1.6. Click Finish.Create Phase■19