SIMOVERT Master Drives Communication Board CBD

Master DrivesCBD05/20/994 Data transfer via DeviceNet4.2 Parameter area (PKW)4.2.1 Use of PKW object4.2.1.4 Parameter ID (PKE)PKE Example 2: Set value of parameter P554.1 = 3001 hexThis example details the decoding of the task PKE and the response PKE of example 2 in the Use of PKWobject section 4.2.1 previously.(PKE):Task ID (request from master)P554 (=22A hex): Source for the ON/OFF1 command (control word 1, bit 0)Change parameter value (array, word) and store in the EEPROM.Parameter ID (PKE)Bit No.: 15 12 11 10 0AK SPMPNUTask IDByte 1 Byte 0Binary value 1 1 0 0 0 0 1 0 0 0 1 0 1 0 10HEX value C 2 2 ABit 12..15:Bit 0..11:Value = 12 (= “C” hex); change parameter value (array, word) and store in the EEPROMValue = 554 (= “22A” hex); parameter number without set parameter change report(PKE):Response ID (response from drive)P554 (=22A hex): Source for the ON/OFF1 command (control word 1, bit 0):Transfer of new value of changed parameter (array, word).Parameter ID (PKE)Bit No.: 15 12 11 10 0AK SPMPNUTask IDByte 1 Byte 0Binary value 0 1 0 0 0 0 1 0 0 0 1 0 1 0 10HEX value 4 2 2 ABit 12..15:Bit 0..11:Value = 4 (= “4” hex); transfer parameter value (array)Value = 554 (= “22A” hex); parameter number without set parameter change reportFig. 4.1Examples, parameter ID (PKE)Siemens AG 477 759 4070 76 J AA-74 25SIMOVERTMASTERDRIVES Betriebsanleitung/OperatingInstructions