SIMOVERT Master Drives Communication Board CBD

More documents

Recommendations

Info

Master DrivesCBD05/20/995 Start-up5.3 Information for the DeviceNet master5.3.2 Using Explicit Messaging with a PLC ScannerExample 4: Read value of parameter U003.1 (with CUMC)The PLC word data is in hex.Block Transfer Write Data:SizeServicePort MAC ID AttributeCommandTXID Class Instance PKE INDPLC Word 0701 000A 0E03 0064 0001 0001 6003 8001 0000 0000DataTXID = 07 (range 01 to FF hex = 1 to 255) should be incremented by PLC logic before each new requestCommand = 01 (always 01) execute transaction blockPort = 00 (range 00 to 01) DeviceNet port of scanner for command (00 = Channel A, 01 = Channel B)Size = 0A hex (choice of 0A hex for Get Single or 0E hex for Set Single)Service = 0E hex (choice of 0E hex = 14 for Get Single or 10 hex = 16 for Set Single)MAC ID = 03 (range 00 to 3F hex = 0 to 63) address of drive set in P918Class = 64 hex (always 64 hex) class number of PKW objectInstance = 01 (always 01)Attribute = 01 (always 01)PKE = 6003 hex (range 0000 to FFFF hex) 6003 hex = Read array parameter U003.1 – for more details,refer to example 1 in the Parameter ID (PKE) section 4.2.1.4 previouslyIND = 8001 hex (range low byte = 00 to FF hex = 0 to 255), (choice of high byte = 00 or 80 hex)8001 hex = index 1 – the high byte = 80 requests the U or b base board parameters, the high byte =00 requests the P or r base board parameters. The low byte = 01 requests index 1 of the parameternumber, for more details refer to example 1 in the Parameter index (IND) section 4.2.1.5 previouslyBlock Transfer Read Data:PWE Low WordSizeServicePortMAC IDStatusTXID PKE PWE High WordPLC Word 0701 0006 8E03 4003 09C4 0000 0000 0000 0000 0000DataTXID = 07 -- must be same number as request TXID aboveStatus = 01 -- (must be 01) -- transaction successfulPort = 00 -- must be same number as request port aboveSize = 06 -- (must always be 06)Service = 0E hex -- must be same number as request service above + 80 hexMAC ID = 3 -- must be same address of drive as request abovePKE = 4003 hex = Transfer of requested parameter U003.1 16 bit value (array) -- for more details, refer toexample 1 in the Parameter ID (PKE) section 4.2.1.4 previouslyPWE = 09C4 hex -- 16 bit value of parameter U003.1 – high word is not used for 16 bit values -- for moredetails, refer to example 1 in the Parameter value (PWE) section 4.2.1.6 previouslySiemens AG 477 759 4070 76 J AA-74 53SIMOVERTMASTERDRIVES Betriebsanleitung/OperatingInstructions
Master DrivesCBD05/20/995 Start-up5.3 Information for the DeviceNet master5.3.2 Using Explicit Messaging with a PLC ScannerNotes54 Siemens AG 477 759 4070 76 J AA-74SIMOVERTMASTERDRIVES Betriebsanleitung/OperatingInstructions
Page 1 and 2:
SIMOVERT Master DrivesCommunication
Page 3:
Table of Contents5 Start-up........
Page 6 and 7: Master DrivesCBD05/20/990 Definitio
Page 8 and 9: Master DrivesCBD05/20/991 Product d
Page 10 and 11: Master DrivesCBD05/20/992 Mounting
Page 12 and 13: Master DrivesCBD05/20/993 Connectin
Page 18 and 19: Master DrivesCBD05/20/994 Data tran
Page 40 and 41: Master DrivesCBD05/20/995 Start-up5
Page 58 and 59: Master DrivesCBD05/20/996 Troublesh
Page 68 and 69: Master DrivesCBD05/20/997 Appendix7
show all

SIMOVERT Master Drives Communication Board CBD

Create successful ePaper yourself

Delete template?

Save as template?