User's Manual - iMPath Networks

FCC Compliance StatementNotice to Users: This equipment has been tested and found to comply with the limits for a Class A digital device.Pursuant to Part 15 of the FCC Rules, these limits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial environment. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmfulinterference to radio communications. Operation of this equipment in a residential area is likely to cause harmfulinterference in which case the user will be required to correct the interference at his own expense.CAUTIONChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authorityto operate the equipmentThe equipment complies with the requirement of FCC CFR 47 PART 15 SUBPART B, Class A.Explanation of Graphical SymbolsThis symbol indicates the presence of important operating andmaintenance (servicing) instruction in the literature accompanyingthe product.This symbol indicates the presence of uninsulated “dangerous voltage”within the product’s enclosure that may be of sufficient magnitude toconstitute a risk of electric shock to persons.Warnings Installation and servicing should be performed only by qualified and experienced personnel. Power off the DVR when connecting cameras, audio, or sensor cables. The manufacturer is not responsible for any damage caused by improper use of the product or failure to followinstructions for the product. The manufacturer is not responsible for any problems caused by or resulting from the user physically openingthe DVR for examination or attempting to fix the unit. The manufacturer may not be held liable for any issues with the unit if the warranty seal is removed.1