User's Manual - iMPath Networks

than two E-mail addresses can be set.5 Repeat the above procedure for Alarm In 2.• Choose ‘OK’ to confirm the setting.4.6.2 Motion Event• Please click ( ) LINK>Motion Event and the following screen will appear.• Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E-mail addresses fornotification.• Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.• Please follow the setup procedures below.1 Click ( ) Motion Event frame and select Motion Event 1.2 Select cameras for recording when Motion Event 1 is on. Please check a check box under Link Camera. More thantwo cameras can be set.3 Select alarm outputs to be worked when Motion Event 1 is on. Please check a check box under Link Alarm Out. Morethan two alarm outputs can be set.4 Select E-mail addresses for notification when Motion Event 1 is on. Please check a check box under Link Notification.More than two E-mail addresses can be set.5 Repeat the above procedure for Motion Event 2.• Click( )By Duration box to set up the recording duration and prevent recording caused by event.The duration time can be controlled by previous setting mode: RECORD>Settings>Event• Choose ‘OK’ to confirm the setting.4.6.3 Video Loss• Please click ( ) LINK>Video Loss and the following screen will appear.35