LANNetwork Type• Please click ( ) Network Type. Every time you click ( ), it changes to Static (fixed IP) and DHCP (floating IP).• In Static, user must manually set the static IP address for use.– Set IP Address, Subnet Mask and Gateway. Please ask your network administrator for more details.– To input address, please click ( ) and execute the keyboard icon on the right-hand side of each frame.• In DHCP, IP Address, Subnet Mask, Gateway and DNS Server will be inputted automatically.DNS Server• When you set Network Type to DHCP, DNS server will be inputted automatically.• When you set Network Type to Static, please click ( ) the keyboard icon on the right-hand side of DNS Server frame andmanually input the address.CAUTIONNOTE THAT DNS SERVER ADDRESS IS IP ADDRESS OF YOUR COMMUNICATIONS COMPANY NAME SERVER PROVIDINGINTERNET SERVICE. IT IS NOT THE IP ADDRESS OF DDNS SERVICE SITE.DDNS• Please click ( ) DDNS and the following screen will appear.• ‘Floating IP system’, although being predominantly used over Internet, is very inconvenient for users because its addressvaries every time you access. The best alternative is DDNS (Dynamic Domain Naming System) which uses name (domain25
name) instead of IP address (numbers). DDNS automatically recognizes ever changing, floating IP addresses, so it willallow easy Internet access.• Check a checkbox of Use DDNS to use DDNS function.• As for DDNS Server, dvrdomain.com name will be showing as default.• As for Port, 95 is shown by default. If ‘95’ is disenable, please consult with a product distributor.• When you press Get Domain Name button, Domain Name and MAC Address value will automatically display after 10seconds.• Choose ‘OK’ to confirm the setting.Port• Please click ( ) Port and the following screen will appear.• Transfer Speed is used for setting a mean transfer speed per unit of time between a client and a DVR.• Set a proper Transfer Speed for a current configuration state of the network for the client to be able to playback DVR screenin optimum state.• There is a total of 14 different transfer speeds you may choose. (bps: bit per second)56 kbps, 128 kbps, 256 kbps, 512 kbps,1 Mbps, 2 Mbps, 4 Mbps, 8 Mbps, 10 Mbps, 20 Mbps, 40 Mbps, 80 Mbps, 100 Mbps, Unlimited• Network video transmission speed and quality can be configured by pressing “Frames” and “Quality” buttons as follows.- Frames : 1, 2, 3, 4, 5, 7, 15 frames for NTSC(1, 2, 3, 4, 5, 6, 12 frames for PAL)- Quality : Std. 1, Std. 2, Std. 3, Std. 4 (standard), High 1, High 2, High 3, Super 1, Super 2, Super 3• The Port Number Setup menu will allow you to set Administrator and Port Number for Video/Audio and Web Port.• For Port Number Setup, please get an approval of the network administrator in connection with CMS program.Port Number:- Administrator: 5000~9999- Video / Audio: 5000~9999- Web: 80~4999CAUTIONIT MAY NOT CHANGE ITS PORT NUMBER IN CMS ACCESS TO DVR.26