Operation Manual - Critical Power Supplies

MST VERSIONWARNING: IN ORDER TO AVOID DAMAGE TO PERSONS AND/OR TO THE MACHINES, PLEASEFOLLOW SCRUPULOUSLY THE INDICATIONS GIVEN BELOW.SOME OF THE FOLLOWING OPERATIONS REQUIRE TWO PEOPLE.Cut the straps and slide the cardboard box offthe unit pulling upwards. Remove the packaging.Remove the box containing the accessories.NOTE: The box of accessories may be inside thepackaging or behind the UPS door.Remove the two brackets securing the UPS to the pallet byloosening screws A and B. Once removed, the two brackets can be used as ramps. Fasten the ramps to the pallet using the screws A and making sureto align them with the wheels of the unit.Turn the feet as far as they will go in order to increase the distance between the unit and the pallet.Make sure that the door is properly closed.WARNING: to unload the UPS from the pallet, we recommend that you push it down the ramps from behind, takingevery precaution and accompanying the unit along the ramps to the floor. In view of the weight of the machine, thisoperation should be carried out by two people.NOTE: We advise you to keep all the parts of the packaging for future use.