Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

Agilent InfiniiVision 2000 X-Series OscilloscopesUser's Guide8LabelsTo turn the label display on or off 105To assign a predefined label to a channel 106To define a new label 107To load a list of labels from a text file you create 108To reset the label library to the factory default 109You can define labels and assign them to each analog input channel, oryou can turn labels off to increase the waveform display area. Labels canalso be applied to digital channels on MSO models.To turn the label display on or off1 Press the [Label] key on the front panel.This turns on labels for the displayed analog and digital channels.Labels are displayed at the left edge of the displayed traces.The figure below shows an example of displayed labels.105