Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

More documents

Recommendations

Info

6 Digital ChannelsTo display digital channels as a busDigital channels may be grouped and displayed as a bus, with each busvalue displayed at the bottom of the display in hex or binary. You cancreate up to two buses. To configure and display each bus, press the[Digital] key on the front panel. Then press the Bus softkey.Next, select a bus. Rotate the Entry knob, then press the Entry knob orthe Bus1/Bus2 softkey to switch it on.Use the Channel softkey and the Entry knob to select individual channelsto be included in the bus. You can rotate the Entry knob and push it orpush the softkey to select channels. You can also press the Select/DeselectD7-D0 softkey to include or exclude groups of eight channels in each bus.If the bus display is blank, completely white, or if the display includes "...",you need to expand the horizontal scale to allow space for the data to beshown, or use the cursors to display the values (see “Using cursors toread bus values" on page 89).The Base softkey lets you choose to display the bus values in hex orbinary.The buses are shown at the bottom of the display.88 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
Digital Channels 6Bus values can be shown in hex or binary.Using cursors toread bus valuesTo read the digital bus value at any point using the cursors:1 Turn on Cursors (by pressing the [Cursors] key on the front panel)2 Press the cursor Mode softkey and change the mode to Hex or Binary.3 Press the Source softkey and select Bus1 or Bus2.4 Use the Entry knob and the X1 and X2 softkeys to position the cursorswhere you want to read the bus values.Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 89
Page 1:
Agilent InfiniiVision2000 X-SeriesO
Page 5:
In This GuideThis guide shows how t
Page 10 and 11:
7 Display Settings8 LabelsTo displa
Page 12 and 13:
11 Acquisition Control12 Cursors13
Page 14 and 15:
15 Waveform GeneratorBuilding a Mas
Page 16 and 17:
To return the instrument 233Configu
Page 18 and 19:
18 Agilent InfiniiVision 2000 X-Ser
Page 20 and 21:
1 Getting Started• InfiniiVision
Page 22 and 23:
1 Getting StartedInstall the Option
Page 24 and 25:
1 Getting Started2 The oscilloscope
Page 26 and 27:
1 Getting StartedIn the Save/Recall
Page 28 and 29:
1 Getting StartedIf necessary, use
Page 30 and 31:
1 Getting Started4. Entry knob The
Page 32 and 33:
1 Getting Started10. [Auto Scale]ke
Page 34 and 35:
1 Getting Started16. Verticalcontro
Page 36 and 37:
1 Getting Started3 Reinstall the fr
Page 38 and 39: 1 Getting Started4. TRIG OUTconnect
Page 40 and 41: 1 Getting StartedSoftkey labelsThes
Page 42 and 43: 1 Getting Started42 Agilent Infinii
Page 44 and 45: 2 Horizontal ControlsTriggerpointTi
Page 46 and 47: 2 Horizontal Controlsstopped, adjus
Page 48 and 49: 2 Horizontal ControlsXY Time ModeTh
Page 50 and 51: 2 Horizontal ControlsNOTEZ-Axis Inp
Page 52 and 53: 2 Horizontal ControlsNegative delay
Page 54 and 55: 2 Horizontal Controls3 Press Play M
Page 56 and 57: 3 Vertical ControlsChannel,Volts/di
Page 58 and 59: 3 Vertical ControlsTIPIf the channe
Page 60 and 61: 3 Vertical ControlsThe Probe Check
Page 64 and 65: 4 Math Waveforms2 If f(t) is not al
Page 66 and 67: 4 Math WaveformsFigure 5 Example of
Page 69: Math Waveforms 4• Center — sets
Page 72 and 73: 4 Math WaveformsFFT UnitsFFT DC Val
Page 74 and 75: 4 Math WaveformsFFT Spectral Leakag
Page 76 and 77: 5 Reference Waveforms2 In the Refer
Page 78 and 79: 5 Reference Waveforms1 Display the
Page 80 and 81: 6 Digital ChannelsTurning off power
Page 82 and 83: 6 Digital Channels6 For high- speed
Page 84 and 85: 6 Digital ChannelsAny digital chann
Page 86 and 87: 6 Digital ChannelsThe sizing contro
Page 90 and 91: 6 Digital ChannelsX1 cursorX2 curso
Page 92 and 93: 6 Digital ChannelsInput ImpedanceTh
Page 94 and 95: 6 Digital Channels100 kImpedance10
Page 96 and 97: 6 Digital Channelsyou will discover
Page 98 and 99: 6 Digital Channels98 Agilent Infini
Page 102 and 103: 7 Display Settings3 To erase the re
Page 105 and 106: Agilent InfiniiVision 2000 X-Series
Page 107: Labels 8The figure above shows the
Page 110 and 111: 8 Labels110 Agilent InfiniiVision 2
Page 112 and 113: 9 TriggersYou can save trigger setu
Page 114 and 115: 9 Triggers• Analog channel, 1 to
Page 116 and 117: 9 TriggersPattern TriggerThe Patter
Page 118 and 119: 9 TriggersNOTESpecifying an Edge in
Page 120 and 121: 9 Triggers• For digital channels,
Page 122: 9 TriggersNOTEIt is important, when
Page 128: 9 TriggersFigure 18Triggering on Al
Page 131 and 132: Agilent InfiniiVision 2000 X-Series
Page 133 and 134: Trigger Mode/Coupling 10Trigger Ind
Page 135 and 136: Trigger Mode/Coupling 10Note that T
Page 137 and 138: Trigger Mode/Coupling 10CAUTIONMaxi
Page 139 and 140:
Agilent InfiniiVision 2000 X-Series
Page 141 and 142:
Acquisition Control 11Overview of S
Page 144 and 145:
11 Acquisition ControlOscilloscope
Page 146 and 147:
11 Acquisition Control• Normal
Page 149 and 150:
Acquisition Control 11Use the horiz
Page 151:
Acquisition Control 11See Also •
Page 154 and 155:
11 Acquisition ControlSegmented Mem
Page 156 and 157:
12 CursorsY CursorsY cursors are ho
Page 158 and 159:
12 CursorsThe currently selected cu
Page 160 and 161:
12 CursorsFigure 30Cursors track Zo
Page 162 and 163:
12 CursorsFigure 32Moving the curso
Page 164 and 165:
13 MeasurementsTo make automatic me
Page 166 and 167:
13 MeasurementsMeasurementValidforM
Page 168 and 169:
13 MeasurementsPeak-PeakMaximumMini
Page 170 and 171:
13 MeasurementsBaseOvershootThe Bas
Page 172 and 173:
13 Measurementslocal MaximumPreshoo
Page 174 and 175:
13 Measurements-3σ -2σ -1σ 1σ
Page 176 and 177:
13 MeasurementsFrequencyFrequency i
Page 178 and 179:
13 MeasurementsRise TimeFall TimeDe
Page 180 and 181:
13 Measurements1 Press the [Meas] k
Page 182 and 183:
13 MeasurementsIncreasing the lower
Page 184 and 185:
14 Mask Testing5 Press Automask.6 I
Page 186 and 187:
14 Mask TestingRun UntilThe Run Unt
Page 188 and 189:
14 Mask TestingMask StatisticsFrom
Page 190 and 191:
14 Mask Testing• Oscilloscope Set
Page 192 and 193:
14 Mask TestingThe mask scaling con
Page 194 and 195:
14 Mask Testing:CHAN1:RANG +4.00E+0
Page 196 and 197:
15 Waveform GeneratorThe waveform g
Page 198 and 199:
15 Waveform GeneratorNotice that yo
Page 200 and 201:
15 Waveform GeneratorSoftkey (logic
Page 202 and 203:
16 Save/Recall (Setups, Screens, Da
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
17 Print (Screens)4 Press the Optio
Page 218 and 219:
17 Print (Screens)• Invert Gratic
Page 220 and 221:
18 Utility SettingsSee Also• LAN
Page 222 and 223:
18 Utility SettingsIf Automatic is
Page 224 and 225:
18 Utility SettingsUSB StorageDevic
Page 226 and 227:
18 Utility SettingsIf the ground le
Page 228 and 229:
18 Utility Settings• Preserve —
Page 230 and 231:
18 Utility Settings• “To check
Page 232 and 233:
18 Utility Settings4 Connect a BNC
Page 234 and 235:
18 Utility Settings1 Write the foll
Page 236 and 237:
18 Utility Settings236 Agilent Infi
Page 238 and 239:
19 Web InterfaceThe web interface f
Page 240 and 241:
19 Web InterfaceThe SCPI Command wi
Page 242 and 243:
19 Web InterfaceRemote Programming
Page 244 and 245:
19 Web InterfaceYou can click Previ
Page 246 and 247:
19 Web InterfaceIdentification Func
Page 248 and 249:
19 Web InterfaceTo set a password:1
Page 250 and 251:
19 Web Interface250 Agilent Infinii
Page 252 and 253:
20 Reference• “Transient Withst
Page 254 and 255:
20 ReferenceProbes and AccessoriesS
Page 256 and 257:
20 ReferenceTable 8Model1146AN2774A
Page 258 and 259:
20 ReferenceOther Options Available
Page 260 and 261:
20 ReferenceBinary Header FormatFil
Page 262 and 263:
20 ReferenceWaveform DataHeaderA wa
Page 264 and 265:
20 ReferenceFile Header12 bytesNumb
Page 266 and 267:
20 ReferenceCSV and ASCII XY file s
Page 268 and 269:
20 Reference268 Agilent InfiniiVisi
Page 270 and 271:
IndexCursors key, 33Cursors knob, 3
Page 272 and 273:
IndexMulticast DNS, 221Multiply mat
Page 274:
Indexunits, external trigger probe,
show all

Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

Create successful ePaper yourself

Delete template?

Save as template?