Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

1 Getting StartedIn the Save/Recall Menu, there are also options for restoring the completefactory settings (see “Recalling Default Setups" on page 212) or performinga secure erase (see “Performing a Secure Erase" on page 213).Use Auto ScaleUse [Auto Scale] to automatically configure the oscilloscope to best displaythe input signals.1 Press [Auto Scale].You should see a waveform on the oscilloscope's display similar to this:2 If you want to return to the oscilloscope settings that existed before,press Undo AutoScale.3 If you want to enable "fast debug" autoscaling, change the channelsautoscaled, or preserve the acquisition mode during autoscale, pressFast Debug, Channels, or Acq Mode.These are the same softkeys that appear in the AutoScale PreferencesMenu. See “To set AutoScale preferences" on page 227.26 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide