Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

Reference 20Table 6ModelN2771A/BN2862A/BN2863A/BN2889AN2890APassive Probes (continued)DescriptionPassive probe, 1000:1, 30 kV, 50 MHzPassive probe, 10:1, 150 MHz, 1.2 mPassive probe, 10:1, 300 MHz, 1.2 mPassive probe, 10:1/1:1, 350 MHz, 1.2 mPassive probe, 10:1, 500 MHz, 1.2 mDifferential ProbesThe following differential probes can be used with the InfiniiVision2000 X- Series oscilloscopes.Table 7Model1141A1144A1145AN2772AN2791AN2792AN2793ADifferential ProbesDescriptionActive differential probe, 200 MHz, 200 VDC + peak AC max (requires1142A power supply)Active probe, 800 MHz (requires 1142A power supply)Active probe, 750 MHz 2-ch (requires 1142A power supply)Active differential probe, 20 MHz, 1.2 kVDC + peak AC max (requiresN2773A power supply)High-voltage differential probe, 25 MHz, +/-700 V, 1 MOhm termination,10:1 or 100:1 (switchable)Differential probe, 200 MHz 10:1, 50 Ohm terminationDifferential probe, 800 MHz 10:1, +/-15 V, 50 Ohm terminationCurrent ProbesThe following current probes can be used with the InfiniiVision2000 X- Series oscilloscopes.Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 255