Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

Print (Screens) 173 Press the Network Setup softkey.4 In the Network Printer Setup Menu, press the Modify softkey; then, turnthe Entry knob to select the network parameter you want to enter.The settings that must be entered are:• Network Domain — this is the Windows network domain name.• Username — this is your login name for the Windows network domain.• Password — this is your login password for the Windows networkdomain.To clear an entered password, press the Clear Password softkey.• Printer Address — this is the server or computer name and theprinter's share name in the "\\server\share" format.The Network Domain, Username, and Password settings are common for allnetwork printers.5 Use the Spell, Enter, and Delete Character softkeys to enter the networkprinter settings:• Spell — press this softkey and turn the entry knob to select thecharacter at the current position.• Enter — press this softkey to enter characters and move the cursor tothe next character position.• Delete Character — press the Enter softkey until the desired character ishighlighted; then, press this softkey to delete the character.6 Press the Apply softkey to make the printer connection.A message appears to tell you whether the connection was successful.To specify the print optionsIn the Print Configuration Menu, press the Options softkey to change thefollowing options:• Setup Information — Select this to print oscilloscope setup information onyour printout, including vertical, horizontal, trigger, acquisition, math,and display settings.Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 217