T60xDFH-4 and T60xDFH-4+PIR Series Thermostat ... - Enviro-Tec

More documents

Recommendations

Info

Cooling SetpointOnDevice OpenedOnReheatOffDevice ClosedOn/Off, Floating,or ProportionalOutputOff100%Temperature Increase(Increments of 1F°/0.5C°)Figure 14: Cooling Only,Two- or Four-Pipe ApplicationsFIG:clng_nlyOn/Off, Floating,or ProportionalOutput0%Device OpenedOn/Off, Floating,or ProportionalOutputHeating SetpointDevice ClosedTemperature Increase(Increments of 1F°/0.5C°)Figure 15: Heating Only,Two- or Four-Pipe ApplicationsHeating OutputFIG:htng_nlyDeviceOpenedTemperature Increase(Increments of 1F°/0.5C°)Figure 17: Heating with Reheat,Two- or Four-Pipe ApplicationsHeating SetpointDeadbandHeating OutputCooling OutputCooling SetpointFIG:htg_wth_rhtDeviceOpenedHeating SetpointCooling OutputCooling SetpointDeviceClosedDeviceClosedOn/Off, Floating, orProportional OutputsOnDeadbandDeviceOpenedTemperature Increase(Increments of 1F°/0.5C°)FIG:htng_clngOnReheatOffOffDeviceClosedOn/Off, Floating,or ProportionalOutputsFigure 18: Heating/Cooling,Four-Pipe ApplicationsTemperature Increase(Increments of 1F°/0.5C°)FIG:clng_wth_rhtFigure 16: Cooling with Reheat,Two- or Four-Pipe Applications12T60xDFH-4 and T60xDFH-4+PIR Series Thermostat Controllers with Dehumidification and OccupancySensing Capability Installation Instructions
On/Off, Floating,or ProportionalOutputsHeating OutputCooling OutputOnHeating SetpointCooling SetpointOnReheatOutputOffOffDeviceOpenedDeadbandDeviceOpenedDeviceClosedDeviceClosedTemperature Increase(Increments of 1F°/0.5C°)FIG:htng_clng_rhtConfiguring Automatic Fan SpeedUse the Fan Menu parameter in the InstallerConfiguration Menu to set the available fan modeoptions. Use the FAN key to select the desired fanmode option.Figure 19: Heating/Cooling with Reheat,Four-Pipe ApplicationsWhen selection option (2): Low-Med-High-Auto ischosen in the Fan Menu parameter, the fan operatesas shown in Figure 20. When selection option(3): Low-High-Auto is chosen in the Fan Menuparameter, the fan operates at only the low and highsettings and ignores the medium setting (Figure 20).This operation applies to the Occupied mode when thefan is set to Auto.FanSpeedHighMediumOnOffLowOnOffHeatingSetpointThe fan is offbetween theheating andcooling setpointsif the Auto Fanparameter isset to AS AD.CoolingSetpointOffOnOffOn100%HeatingValve2.0F°/1.0C° to5.0F°/2.5C°DeadbandCoolingValve0%FIG:fn_oprtn2.5 2.0 1.5 0.5 0.51.5 2.0 2.5Temperature Deviation from Setpoint, °FFigure 20: Low-Med-High-Auto and Low-High-Auto Fan OperationT60xDFH-4 and T60xDFH-4+PIR Series Thermostat Controllers with Dehumidification and OccupancySensing Capability Installation Instructions13
Page 4 and 5: Table 1: Terminal Identification (S
Page 6 and 7: BO224 V~Hot24 V~ComN.C.CoolingValve
Page 8 and 9: Status Display MenuThe Status Displ
Page 10 and 11: OccupiedStand-By= 2 HrsStand-By= 2
Page 14 and 15: Table 4: Installer Configuration Me

T60xDFH-4 and T60xDFH-4+PIR Series Thermostat ... - Enviro-Tec

Create successful ePaper yourself

Delete template?

Save as template?