W216-28G-GB-TCU-UK - Sky Media UK LTD

More documents

Recommendations

Info

General InformationOPERATING THE TV WITH A UNIVERSALOR SKY (BSKYB) REMOTE CONTROLUsing a Universal Remote Control.You may wish to use a Universal Remote control to operate your Television. In order to do so, youwill need to enter the ‘code’ below into your universal remote control, to do this, please follow theinstructions included with the Universal remote control. Please note that if your remote control does notaccept the code, this is because the software/firmware installed on the remote control is too old. Pleasecontact the manufacturer of the Universal Remote control for assistance.Universal Remote Code - 2106 (TV functions)2302 (DVD Functions - where included on the TV)Using a Sky / Sky+ / Sky HD Remote ControlIf you wish to use your Sky remote control to operate your Television, you need to programme a 4 digitcode into your Sky, Sky+ or Sky HD remote control.Please note that the code below will only be accepted if the Sky remote control is a Revision 9 (launchedAutumn 2010) or later.To find out which version of Sky remote you have, remove the battery cover, you should see a stickershowing the ‘Rev’ number.If your Sky remote is Rev 8 or earlier, you will need to purchase a new Sky Remote control in order tooperate the TV’s functions. At the point of manufacture of this TV, the latest Revision 9 remote controlsare only available to purchase directly from Sky, alternatively, you can purchase our versions from thehelpline / website.The very latest versions of remote controls to operate your Sky/ Sky+ / Sky HD in addition to operating the functions of theTelevision can be purchased from the helpline or website.Our versions (from One for All) are slightly smaller than theregular Sky remotes and operate your Sky box the same wayyour current Sky remote does, in addition, our versions operatethe functions of your television as they include the very latestsoftware/firmware.Please note that as we have to install the necessary software /firmware onto the remote control prior to shipping, you mustprovide us with your TV model number in order that we cando this.SkySky+/Sky HDIf your Sky remote control is a Revision 9 or later, please follow the instructions below.1) Press TV2) Press and hold the ‘Red’ button and ‘Select’ at the same time until the red LED light at the top of theremote flashes twice.3) Enter the code. If the code is accepted the red LED light will blink twice. If the LED only blinks once…you have either entered the code incorrectly or the Sky remote isn’t a revision 9.4) Press select to store the code.5) Press the Standby button on your Sky remote control and the TV should go into standby mode.26Sky / Sky+ / Sky HD Remote code - 2134 (Revision 9 or later only)AFTER SALES SUPPORTGB 0871 2000 463 IRE 01443 3940 www.skymediauk.co.ukMODEL: 216-28G-GB-TCU-UKYEARSWARRANTYUser Guide emotion - W216-28G-GB-TCU-UK.indd Sec1:2631-May-12 2:55:02 PM
General InformationFREQUENTLY ASKED QUESTIONSGeneralGeneralI would like to have loudersound by connectingadditional speakersWhy are some options inthe menu unavailable andgreyed outSubject to the TV model and connections, it is possible to connect the TVto an external amplifier or surround sound (subject to connections/inputson the device) as follows:-1) Connect a COAX cable* from the TV’s COAX output to your amplifier/surround systems COAX input2) Connect a 3.5mm jack to L/R phono cable* from the TV’s headphonesocket (where fitted) to your amplifier/surround sound L/R input. Pleasenote sound to the TV’s speakers will be disabled.3) On selected models, it maybe possible to connect a SCART input/output* switch with an additional L/R Phono cable* to the TV’s SCARTsocket and to the L/R Phono Input of your amplifier/surround sound.Please note due to copyright laws it is not possible to output video/soundfrom the TV on certain sources, i.e. HDMi, DVD etc.*cables and switches mentioned are available to purchase separately fromyour retailer.Some options are only available in certain sources, i.e. HDMI, PC/VGA.They are unavailable in the other sources where they have no affect.TVTVVCR/DVDRecorderGame ConsolesGame ConsolesUSB ModeUSB ModeSystem LockEcohomeI have tuned in Digital TVbut I am not receiving anyor all of the channels and/or the channels I receive arebreaking upI have re-tuned my televisionbut when I switch it off it isnot storing the channelsI have connected the TV tomy VCR or DVD Recorder viaSCART but it is not recordingI have connected my PS3 tothe TV via HDMI, but I amnot receiving any pictures orsound on my TelevisionI have connected myXbox 360 to the TV viaComponent Cables (Red,Green & Blue) but I am notreceiving any soundI have inserted a USBMemory Key, but the TVdoes not recognise itUsing a USB portable harddriveI have changed the passwordon the television and nowforgotten itCan I stop my TV turning offafter 4hrs?1) Check you are in an area that can receive Freeview/Digital.Visit www.freeview.co.uk or www.saorview.ie2) Check you are using an aerial that is able to receive a good digitalsignal. In most cases, you will need an outdoor digital hi-gain/widebandaerial. In areas that have excellent Freeview/digital coverage, you may beable to use a loft type aerial but it is highly likely that you will also needto connect a booster between the back of the TV and the TV aerial wallsocket. Unfortunately, to receive a good enough digital signal, it is notpossible to use a portable/indoor type aerial. This may change once theanalogue signal is switched off in 2012 and the Digital signal strength isincreased.Complete a first time installation, please refer to the set-up menu sectionof the manual of how to do thisIn addition to connecting via SCART, you should connect the aerial cablefrom the wall socket to your VCR/DVD Recorder and another aerial cablefrom the VCR/DVD Recorder to the TV1) Ensure the TVs source is on HDMI2) Check your settings on your PS3 are as per the PS3 instruction manualComponent cables only provide HD Pictures. For the sound you will needto connect the Red & White audio cables on the Xbox to the Red & Whitephono inputs on the rear of the TV. Please refer to the ‘Connections’pages.Ensure the USB Memory Key is formatted to type FAT32.If you wish to use a portable hard drive larger than 32GB, please notethat it must be formatted to the FAT32 file system in order to operate onthis TV. Windows XP/Vista computers are only capable of formatting upto 32GB, therefore, you will need a software programme/utility to formatlarger hard drives. Please refer to the web site for more information.There is a master password of 4711, to gain access to the TV menu andreset the normal passwordYes1) In the picture settings menu, de-select Eco-home2) In the time settings menu, scroll down to Auto standby and selectAFTER SALES SUPPORTGB 0871 2000 463 IRE 01443 3940www.skymediauk.co.ukMODEL: 216-28G-GB-TCU-UKYEARSWARRANTY27User Guide emotion - W216-28G-GB-TCU-UK.indd Sec1:2731-May-12 2:55:03 PM
Page 1: IMPORTANT SAFETY INSTRUCTIONSPlease
Page 5 and 6: PUSHAttaching / Detaching the stand
Page 7 and 8: Getting Started - Initial Set UpGET
Page 9 and 10: Remote ControlREMOTE CONTROL11STAND
Page 11 and 12: ConnectionsCONNECTIONSConnecting a
Page 14 and 15: TV Menu OperationSOUND MENUAVTo acc
Page 16 and 17: TV Menu OperationFEATURE MENUAVTo a
Page 18 and 19: PC OperationUSING THE TELEVISION AS
Page 20 and 21: 7 DAY TV GUIDETV Guide is available
Page 24 and 25: TECHNICAL SPECIFICATIONGeneral Info
Page 26 and 27: Warranty Card22’’ DIGITAL LCD T
Page 28: EMO/MAN/0005User Guide emotion - W2

W216-28G-GB-TCU-UK - Sky Media UK LTD

Create successful ePaper yourself

Delete template?

Save as template?