25-Size Float Set - E-flite

More documents

Recommendations

Info

3. Enlarge the middle hole in the steering armwith a 5/64" (2mm) drill bit. Secure a pushrodconnector on the steering arm using a pushrodconnector backplate. 4. Enlarge the outboard hole in the rudder controlhorn using a 5/64" (2mm) drill bit. Secure apushrod connector on the rudder horn using apushrod connector backplate.22
5. With the pushrod cable inside the pushrod tube,attach the tube to the float using a full brass strapand two 2mm x 10mm sheet metal screws. Theend of the pushrod tube is 1 1 / 2 " (38mm) from theend of the float. 6. Bend two full brass straps to attach the pushrodtube to the top of the fuselage. Leave the strapsslightly loose so it can be moved around for thenext step.23
Page 7 and 8: Float Installation (J-3 Cub)Require
Page 9 and 10: 4. Attach the floats using the four
Page 11 and 12: 7. Attach the ventral fin to the mo
Page 13 and 14: 3. Enlarge the middle hole in the s
Page 15 and 16: 7. Use a tie wrap to attach the pus
Page 17 and 18: Float Installation (Ultra Stick 25e
Page 19 and 20: 4. Use a file or rotary tool to mak
Page 21: 1. Attach a nylon bracket to the re
Page 25 and 26: 9. Position the water rudder parall
Page 27 and 28: Landing on water is very similar to
Page 29 and 30: 2006 Official AMA National Model Ai
Page 31 and 32: Notes31

25-Size Float Set - E-flite

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?