Owner's Guide - DirectedDealers.com

Using the systemPlease note the screen shot to the right of a feature indicates what thedisplay looks like when this feature is activated.ArmCommand: Press one time to ArmFeedback: Lock Icon will appear, and one beepfrom remoteNotes: the system and then activate thePanic outputDetails will flash once. If the power door locks have been connected, thedoors will lock. The system will automatically check for errors when it confirm arming. If no arm confirmation is received, the remote will givethe Out-Of-Range signal.If errors are found when arming:If an alarm trigger zone – such as a door, the trunk, the hood, or a ignore, this trigger zone. This allows the system to continue to protectyour vehicle using the remaining trigger zones.You are notified of this active zone immediately after arming the system. indicator in the vehicle will blink in a pattern to indicate the activezone number error which was found (See Table of Zones). The 2-way the active zone..© 2008 Directed Electronics. All rights reserved.17