Owner's Guide - DirectedDealers.com

Power saver mode SystemYour system will automatically enter Power Saver Mode while armed or performed. This lowers the current draw on the vehicle’s battery. PowerSaver Mode takes over under the following conditions:Power Saver when the system is armed: After the system has beenarmed for 24 hours the LED will flash at half its normal rate, decreasingthe system’s current draw.Power Saver in Valet Mode: Status LED on the Responder LE control center illuminates steadily. If thevehicle is not used (ignition is not turned on) for a one hour period while ignition is turned on and then back off. 2-way remoteYour Responder LC 2way remote control has a feature called remotepower save mode. When programmed ON under remote options, theremote will conserve power by disabling the paging function if unusedfor more than 72 hours. Pressing any button on the remote will restorethe paging function.The default setting is ON. See Remote control programming section ofthis guide or ask your dealer for details on how to program.46 © 2008 Directed Electronics. All rights reserved.