Owner's Guide - DirectedDealers.com

Note: Bypass Notification does not occur when the system is in SilentMode or if the notification chirps have been programmed off by theinstaller. Disarming If four chirps are heard when disarming the system, then the securitysystem was triggered in your absence.If five chirps are heard when disarming the system, the system was bypassed the intended zone. In either case, the status LED will indicatewhich zone was involved (see Table of Zones).The security system will retain this information in its memory, and chirp ignition is turned on.Note concerning low battery alert: When the batteries in the remoteare low the alarm will give an additional chirp when disarming to letyou know its time to change the battery in the remote. System status chirps chirps will audibly report the system’s status as described below.Action Number of Chirps DescriptionArm 1 System armedArm 1 (3-second delay) + 1 System armed with bypass notificationDisarm 2 System disarmed42 © 2008 Directed Electronics. All rights reserved.