Installation Instructions - Vivid Racing

www.vf-engineering.comPorsche 997 (US MODEL) Stage1 INSTALLATION27. Remove the heat shields from both valve covers to gain access to the coil pack connectors.Disconnect the coil pack connections.PAGE 26 of 5128. On the passenger side of the engine bay, disconnect the intake air temperature senor and plasticengine wire harness casing from the fuel rail and move out of the way to gain access to the twofuel rail bolts on each side of the vehicle. Remove the fuel rail bolts and pull the fuel rail slightlyP/N: VFM59-01© 2006 VF EngineeringAll rights reservedRev 1.11.21.06