Installation Instructions - Vivid Racing
Installation Instructions - Vivid Racing
Installation Instructions - Vivid Racing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.vf-engineering.comPorsche 997 (US MODEL) Stage1 INSTALLATION45. Install the brass oil supply fitting (with rubber o-ring) supplied with your kit, then attach thesupercharger oil feed line to this fitting and route as shown.46. Remove the serpentine idler pulley from the driver’s side of the engine and set aside for later use.PAGE 34 of 51P/N: VFM59-01© 2006 VF EngineeringAll rights reservedRev 1.11.21.06