Installation Instructions - Vivid Racing

More documents

Recommendations

Info

www.vf-engineering.comPorsche 997 (US MODEL) Stage1 INSTALLATION45. Install the brass oil supply fitting (with rubber o-ring) supplied with your kit, then attach thesupercharger oil feed line to this fitting and route as shown.46. Remove the serpentine idler pulley from the driver’s side of the engine and set aside for later use.PAGE 34 of 51P/N: VFM59-01© 2006 VF EngineeringAll rights reservedRev 1.11.21.06
www.vf-engineering.comPorsche 997 (US MODEL) Stage1 INSTALLATION47. Loosely install the replacement serpentine belt included in the kit, as show in the picture below.48. Install the replacement main vacuum line included in your kit, running across the bottom of theengine bay, to the same locations from which you removed the original line.PAGE 35 of 51P/N: VFM59-01© 2006 VF EngineeringAll rights reservedRev 1.11.21.06
Page 1 and 2: www.vf-engineering.comPorsche 997 (
Page 33: www.vf-engineering.comPorsche 997 (
Page 51: www.vf-engineering.comPorsche 997 (

Installation Instructions - Vivid Racing

Create successful ePaper yourself

Delete template?

Save as template?