Installation Instructions - Vivid Racing

More documents

Recommendations

Info

www.vf-engineering.comPorsche 997 (US MODEL) Stage1 INSTALLATION41. Attach the throttle body vacuum adapter (with fittings) supplied in the kit to the throttle body.Connect the small rubber hose that was once connected to the plastic crankcase hose to thelower fitting of the adapter.42. Reinstall the oil fill tube.43. Loosely reinstall alternator, omitting the driver side alternator bolt for the time being. Install thenew threaded shaft and spacer included in your kit in the passenger side alternator bolt’smounting point. Do not reinstall the pulley and spacer that was originally on the passenger sidealternator bolt. You will be using them elsewhere at a later time.***TIP: When refitting the alternator, make sure the alternator bolt does not pierce or chafethe positive wire leading to the back of to the alternator.PAGE 32 of 51P/N: VFM59-01© 2006 VF EngineeringAll rights reservedRev 1.11.21.06
www.vf-engineering.comPorsche 997 (US MODEL) Stage1 INSTALLATION44. Remove the plug from the driver side oil supply galley, located near coolant tank.PAGE 33 of 51P/N: VFM59-01© 2006 VF EngineeringAll rights reservedRev 1.11.21.06
Page 1 and 2: www.vf-engineering.comPorsche 997 (
Page 31: www.vf-engineering.comPorsche 997 (
Page 51: www.vf-engineering.comPorsche 997 (

Installation Instructions - Vivid Racing

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?