A-Teachers-Guide-to-the-Intel-Galileo-Final

More documents

Recommendations

Info

71 | Connecting to the Outside World12. Now click on Add an Action and select the Pushbullet service as an action.13. Now add an action with this service.14. You can type in the title, text and optionally a photo for your message and then clickSubmit.
A TEACHER’S GUIDE TO THE INTEL® GALILEO | 7215. Click on the Back button to return to the Scenario page.16. You can now test your scenario by clicking on Test Scenario.17. You should receive a mobile phone message.When you call pushingbox with the DeviceId of this scenario, you will prompt the associatedaction to occur. In our case, to send a text message to our connected mobile. We will use ourArduino code to call pushingbox.The Arduino programThe Arduino program simply makes a call to the pushingbox service. Upload the followingsketch:void setup() {// put your setup code here, to run once:Serial.begin(9600);pinMode(2, INPUT); // connect your switch between Pin 2 and 5VpinMode(12, OUTPUT); // connect an LED so you know when you are sending}void loop() {// put your main code here, to run repeatedly:int sensorValue = digitalRead(2);digitalWrite(12, sensorValue);if (digitalRead(2) == HIGH) {system("curl 'http://api.pushingbox.com/pushingbox?devid=vXXXXXXXXXXXX' > /dev/ttyGS0"); // put your devid instead of XXXX}delay(500);}
Page 8:
3 | IntroductionHow to use this gui
Page 14 and 15:
9 | Pedagogical ApproachesAs a proc
Page 16 and 17:
11 | Setting Up Your Intel® Galile
Page 18 and 19:
Page 22 and 23:
Page 24 and 25:
19 | Beginning with ArduinoCoding I
Page 26 and 27: 21 | Beginning with ArduinoIn this
Page 28 and 29: 23 | Beginning with Arduino4. From
Page 30 and 31: 25 | Beginning with Arduino3. From
Page 33 and 34: A TEACHER’S GUIDE TO THE INTEL®
Page 75: A TEACHER’S GUIDE TO THE INTEL®
show all

A-Teachers-Guide-to-the-Intel-Galileo-Final

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?