Isadora Manual v1.3 - TroikaTronix

control panel, e.g., by connecting the position output of the Movie Player to a Slider
control.
A horizontal bar drawn below Scenes in the Scene List represents control Panels
visually. The bar indicates the Scene or Scenes with which the Control Panel is
associated. If a Control Panel is associated with two or more Scenes, the bar below
those scenes will be unbroken.
Isadora Manual
Same Control Panel for All Scenes
Control Panel for Scenes One & Two, different Control Panel for Scene Three
Different Control Panels for Each Scene
It is important you understand that when editing a Control Panel associated with
more than one Scene, that you are changing the panel for all of those Scenes.
You can create a separate Control Panel for a group of Scenes using the Split
Control Panels command from the menu. The inverse can be accomplished by the
Join Control Panels command.
Editing Scenes and Their Control Panels
The Control Panel associated with a Scene travels with that Scene when it is copied
or cut. After a paste, Isadora will group all Control Panels that are the same,
indicating that group by an unbroken bar below the scenes. Otherwise a gap will
appear to show that there is a separate Control Panel.
Take a look at the following examples.
Select Scene Three and Cut
Paste Before Scene One
In the example above, Scene Three is cut and then pasted before Scene One. Since
the Control Panel for Scene Three and Scene One were the same, the bar below the
first three Scenes remains unbroken.
104