Isadora Manual v1.3 - TroikaTronix

• TIP: If you can’t find all of the windows because one of them is on the video
projector, click the “Gather Windows” button to bring all of the windows to
the current display.
• TIP: If you tick the box labeled “Show Displays in Menu Bar” much of the
information accessed in these windows becomes available in the main menu
bar at the top-right of the screen under the icon.
• Click the “Arrangement” tab. The window will now look something like this:
(Note: if your computer has multiple video cards, one rectangle will appear
for each video projector connected to your system.)
• If the “Mirror Displays” checkbox is ticked, click it so that it is no longer
enabled.
• If the menu bar (the little white rectangle) shown in this window is not at the
top of your main display, then click inside it and drag it to the monitor where
you want the menu bar to appear.
• You can drag the window rectangles themselves to specify the “virtual layout”
of the windows. In the image above, the second display is to the right of the
main display in the virtual space.
• Setup of the displays is now complete.
Windows 7
• Choose Start > Control Panel and click the Connect to a Projector link in
the Hardware and Sound settings.
Isadora Manual
147